Ametek Land SPOT ACTUATOR, Руководство пользователя

Страница: 6 / 38

Fixed Spot Thermometers SPOT Actuator
This section describes the components of the SPOT Actuator system.
Before setting up your system, check that you have been supplied with all
components. If any components are missing or damaged, contact AMETEK
Land Instruments.
Item Land Part Nº Notes
SPOT Actuator 811824 Mount in a suitable
location via the 4 x 8.5 mm
mounting holes. Refer to the
Installation Drawing, Fig. ?-?.
Unscrew the two M8 x 16 Hex
Screws (with spring washers
and plain washers) in order to
attach the SPOT Water Cooled
Jacket (808100) or the SPOT
Light Purge (808015).
SPOT Water Cooled Jacket 808100 Attach to the Actuator via the
two M8 x 16 Hex Screws (and
washers).
Refer to the SPOT Water
Cooled Jacket Installation
Guide (supplied) for
instructions on fitting the
SPOT pyrometer into the
purge.
SYSTEM COMPONENTS
2
User Guide 2 - 0