AmeriWater 000-HS120, Руководство по эксплуатации и техническому обслуживанию

Страница: 53 / 79

51
098-0007 Rev B
Steps Actions
fuse into the fuse holder and reinsert the
fuse into the cap.
Step 5:
Reinsert the fuse and cap into the fuse
holder. Align the locking tabs and push
the fuse and cap toward the fuse holder.
Turn the cap clockwise. The fuse holder
should lock in place when successfully
installed.
Step 6
Repeat steps 2-5 for the second fuse.
Reconnect the device to the 120 VAC
outlet when both fuses have been
successfully replaced. Verify the device
powers on and return the device to
service.
10.7 How to format SD card
The SD card located in the PLC on the End to End device is pre-formatted to save data logs during
disinfection cycles from the factory. If this SD card is lost, damaged or replaced with an SD card that was
NOT supplied by AmeriWater, that SD card must be formatted before use to work properly. Use the
following steps to format the SD card. Refer to Section 0 for SD card specifications.
Steps Actions
Step 1: Connect the SD card to a windows PC
using a micro SD to SD. A suitable
adapter is included with the system when
purchased.
Step 2: On the windows PC, navigate to the
following URL:
https://unitronicsplc.com/ .
In the navigation menu at the top of the
page, select SOFTWARE

VISILOGIC.
Step 3:
Scroll to the bottom of the page and
select Download Software Utilities.
The menu should expand. Locate “SD
Card Suite”. Select download.
Step 4:
Once the SD card suite successfully
downloads, open SD card suite on the PC.
Select Tools from this menu.