American Megatrends Enterprise-III Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 121

background image

© Copyright 1993 American Megatrends, Inc.
All rights reserved.
American Megatrends, Inc.
6145F Northbelt Parkway
Norcross, GA 30071

This publication contains proprietary information which is protected by copyright. No part of this publication may be reproduced,
transcribed, stored in a retrieval system, translated into any language or computer language, or transmitted in any form whatsoever
without the prior written consent of the publisher, American Megatrends, Inc.

Limited Warranty

Buyer agrees if this product proves to be defective, that American Megatrends, Inc. is only obligated to replace or refund the
purchase price of this product at American Megatrend's discretion according to the terms and conditions of the warranty card
accompanying the Enterprise-III motherboard. American Megatrends shall not be liable in tort or contract for any loss or damage,
direct, incidental or consequential. Please see the Warranty Registration Card shipped with this product for full warranty details.

Limitations of Liability

In no event shall American Megatrends be held liable for any loss, expenses, or damages of any kind whatsoever, whether direct,
indirect, incidental, or consequential, arising from the design or use of this product or the support materials provided with the
product.

Trademarks

American Megatrends acknowledges the following trademarks:

Intel and i486 are registered trademarks of Intel Corporation.
MS-DOS, Xenix, and Microsoft are registered trademarks of Microsoft Corporation.
IBM, AT, VGA, OS/2, and EGA are registered trademarks of International Business Machines Corporation. XT and CGA are trademarks of International Business Machines
Corporation.
Fujitsu is a registered trademark of Fujitsu America, Inc.
Motorola is a registered trademark of Motorola Corporation.
Oki is a registered trademark of Oki America, Inc.
NEC is a registered trademark of NEC Corporation.
Samsung is a registered trademark of Samsung Electronics Corporation.
Siemens is a trademark of Siemens Corporation.
Mitsubishi is a registered trademark of Mitsubishi Electronics of America.
Unix is a registered trademark of American Telephone and Telegraph Company Bell Laboratories.
Weitek is a trademark of Weitek, Inc.
Toshiba is a registered trademark of Kabushiki Kaisha Toshiba.

Revision History

10/31/92Initial release for Rev A of the motherboard.
1/11/93

Revised for Rev B of motherboard.

4/16/93

Revised for Rev B of motherboard.

«
1
2
3
4
...
»

Содержание Enterprise-III


























































































































Отзывы:

Нет отзывов

Похожие инструкции для Enterprise-III

Бренд: Acer Страницы: 2

Бренд: IEI Technology Страницы: 211

Бренд: IEI Technology Страницы: 8

Бренд: IEI Technology Страницы: 8

RouterBOARD 411

Бренд: 4gon Страницы: 2

Side-Power SEP IP Series

Бренд: SLEIPNER MOTOR AS Страницы: 28

Бренд: ASRock Industrial Страницы: 44

Cyclone IV GX FPGA

Бренд: Altera Страницы: 60

TA870 PLUS - SETUP 2

Бренд: Biostar Страницы: 67

Бренд: J&W Страницы: 36

SUPER P4DPL-8GM

Бренд: Supero Страницы: 86

Бренд: Gigabyte Страницы: 40

Бренд: Intel Страницы: 1

Бренд: TYAN Страницы: 118

Бренд: COX Страницы: 60

Бренд: Supermicro Страницы: 126

Бренд: Commell Страницы: 49

Бренд: ASROCK Страницы: 160

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды