American Innovations MicroMax GPS360, Руководство пользователя

Страница: 36 / 68

Interrupters User Guide
Chapter 5: Interrupter Programming 31
Icon Description
Wrench — indicates that user should press the Wrench key on
the keypad to make a change or run a test.
Battery — GPS360 only; indicates the battery charge state. A full icon
means that the battery is full. Refer to
GPS360 Power and Battery
Information on page 22 for more information on using the built-in
battery for interruption.
Charging — GPS360 only; indicates that the battery is charging. This
icon will be replaced by the battery icon when the battery has been
fully charged. Refer to
GPS360 Power and Battery Information on
page 22 for more information on using the built-in battery for
interruption.
Table 5-1. Status Icons cont'd
Configuring with Unit Keypad
The MicroMax interrupters can be programmed through keypad menus and buttons. The following
set-up tasks can be done from the keypad on the unit:
l
Setting Up and Running an Interruption Program on page 31 — set up to nine different
interruption programs.
l
Setting Up an Interference Interruption Program on page 33 — set up or run an interference
interruption program.
l
Options Features on page 35 — set other features of the interrupters, including Output
Parameters , Setting the UTC Offset , and Using Zero Crossing .
Setting Up and Running an Interruption Program
Complete the following steps to set up and run an interruption program from the interrupter
keypad:
1.
With the main menu displaying, press 1 on the keypad.
Figure 5-1. Main Menus - GPS300 and GPS350 (L) and GPS360 (R)