Interrupters User Guide
Chapter 5: Interrupter Programming
32
The GPS360main menu includes an icon for the battery. When the battery is fully charged, the
icon is solid. As battery power decreases, the icon changes to reflect current battery charge.
When the battery is charging, the battery icon is replaced with a charging icon . All other
screens for the GPS360 are the same as for the GPS300 and GPS350.
2.
Press any key from 1 to 9 to display the Interruption Program Setup screen for that program
number.
Figure 5-2. Interruption Program Setup Screen
The list below describes the type of information shown on the Programming Menu:
l
# 5 On 12.0 Off 03.0:
The program number. Press any number from 1 to 9 to view a
saved program. The first line also shows the
On
and
Off
times of the interruption cycle.
l
Start 06:00 01/01/14:
The interruption schedule (Start/Stop) and the start time and
date. For Daily, this line would also include the time set for the interruption to begin
and end. For Continuous, this line would only display Continuous.
l
Stop 18:00 12/31/99
: For Start/Stop interruption only; the stop time and date.
l
Change and Set:
Use the Wrench
key ( ) to change the
interruption schedule. Use the up
and down
arrow keys to change the values.
Press
ENTER
( ) to start the program.
3.
Press
to change the interruption schedule. Available interruption schedules include:
l
Continuous
l
Daily
l
Start / Stop
For
Start /
Stop
date, enter a date using the MM/DD/YY format to indicate the month,
day, and year, such as 08/02/14.
4.
To move from one field to another, press
or
.
5.
To enter a time such as
3.0
press the following keys on the keypad:
a.
3
b.
0
Содержание MicroMax GPS360
Страница 1: ...Proven compliance solutions Relentless service Interrupters User Guide Interrupters User Guide...
Страница 5: ...Interrupters User Guide v Appendix E Regulatory Notices 63 Export Control Classification Number 63...
Страница 60: ...Interrupters User Guide Chapter 5 Interrupter Programming 55 The configuration is now complete...
