American Dynamics MegaPower ADMPCPU, Руководство администратора

Страница: 55 / 86

MEGAPOWER CPU 8200-0421-03, REV. G
ADMINISTRATOR’S GUIDE
53 of 82
The Calling Contacts tab contains the following
fields:
Figure 113. Cameras Calling Contacts tab screen
•
Contact No. – Number of the alarm contact
associated with the camera
•
Preset or Pattern – Preset or Pattern number
associated with the camera
•
Link – Choose either No, Yes, Wired, No Group
Ack, Yes Group Ack, or Wired Group Ack
•
Aux – Choose either Don’t Care, Aux 1 On, Aux 1
Off, Aux 2 On, Aux 2 Off, Aux 3 On, Aux 3 Off, or
Aux 4 On
•
Dwell – Enter the dwell time in seconds
•
Alarm Message – Enter the alarm message
number to be associated with the camera. Note :
Alarm messages are first created in the Alarms –
Alarm Messages screen.
•
Email Message – Enter the Email message
number to be associated with the camera. Note :
Email messages are first created in the Alarms –
Email Messages screen.
Removing Calling Contacts
To remove calling contacts from a camera:
1. Click on a camera (any cell in the keyboard row)
in the upper screen.
2. Click on the calling contact row to be removed in
the Calling Contacts tab in the lower screen.
3. Press the keyboard Delete key of the PC running
EASY CPU. The Delete Rows dialog box
appears.
Figure 114. Delete Rows dialog
4. Click Yes to delete the calling contact definition or
No to retain the definition.
Associating Keyboards to
Cameras
The Partitions – Keyboards to Cameras screen
determines the level of control that keyboard
operators can have over cameras.
Click on the Partitions – Keyboards to Cameras link
in the Explore menu to begin. The following screen
appears (Figure 115 on page 53).
Figure 115. Partitions – keyboards to cameras
screen
The Partitions – Keyboards to Cameras screen is
split into two sections:
•
The upper screen shows existing keyboard
definitions and allows you to create new
definitions. Ranges for camera view access and
camera control access are set up in this screen.
The cameras associated with the keyboard are
listed in the Camera View Access and the
Camera Control Access columns.
The Camera View Access column allows you to
enable selected keyboards to view, but not
control, cameras, while the Camera Control
Access column allows you to enable selected
keyboards to control cameras.
•
The lower screen provides two tabs that allow
you to set up monitor and site access for each
keyboard.
You can create and delete monitor and site
access definitions.