American Dynamics MegaPower ADMPCPU, Руководство администратора

Страница: 21 / 86

MEGAPOWER CPU 8200-0421-03, REV. G
ADMINISTRATOR’S GUIDE
19 of 82
Figure 42. Write to MPCPU and/or Save
Configuration To File dialog
7. In the section labeled MPCPU A and/or B must be
specified in Sys => Options, choose one or both
of the following checkboxes depending on
whether you have a single MPCPU configuration
or both MPCPUs in a dual hotswitch configuration:
•
MPCPU A: When checked, the configuration
is written to the indicated IP address, which is
defined in the System – Options dialog box.
This IP address is read-only in Figure 42.
When unchecked, the configuration is not
written to the indicated IP address.
•
MPCPU B: When checked, the configuration
is written to the indicated IP address, which is
defined in the System – Options dialog box.
This IP address is read-only in Figure 42.
When unchecked, the configuration is not
written to the indicated IP address.
Note: If both MPCPU IP addresses are the same,
a message box will appear stating that the
configuration will only be written once to the IP
address.
Figure 43. MPCPU Addresses are the same
message box
8. In the Site No./Name specified in Sys => Options
section, the Site No. and Site Name fields are for
reference only and cannot be changed in this
dialog box. They are defined in the System –
Options dialog box.
9. In the section labeled Config File Save and
Backup Options, choose one or both of the
following checkboxes:
•
Save To File: When checked, the configuration
is saved to the path and filename shown in the
associated field. You can change the
path/filename by clicking the Browse button on
the right and navigating to the path/filename of
your choice in the dropdown list. When
unchecked, the configuration is not saved.
•
Backup File: When checked, the configuration
is backed up to the path and filename shown in
the associated field. You can change the
path/filename by clicking the
Browse button on
the right and navigating to the path/filename of
your choice in the dropdown list. When
unchecked, the configuration is not saved to
the backup file.
10. Click the Write Configuration To Selected
MPCPUs and/or Files button to begin writing the
configuration data into the CPU, or Cancel to
close the dialog box without writing the
configuration data.
When you click the Write Configuration To
Selected MPCPUs and/or Files button, each IP
address is checked to ensure it has a properly
formatted IP address. If either IP address has an
invalid IP address format, you will receive a
warning message. You will need to correct the
invalid format before continuing.
Figure 44. Invalid IP Address message box
Note: If the configuration being written is a
version V1.00 configuration file, upon clicking
Write Configuration To Selected MPCPUs
and/or Files
, you will be prompted whether or not
to convert the configuration to the V2.00 format
prior to writing to the MPCPUs.
Figure 45. Configuration File Conversion dialog