American Dynamics MegaPower ADMPCPU, Руководство администратора

Страница: 23 / 86

MEGAPOWER CPU 8200-0421-03, REV. G
ADMINISTRATOR’S GUIDE
21 of 82
Note: When you click the Write Configuration
To Selected MPCPUs and/or Files button, each
IP address is checked to ensure it has a properly
formatted IP address. If either IP address has an
invalid IP address format, you will receive a
warning message. You will need to correct the
invalid format before continuing.
Figure 48. Invalid IP Address message box
14. Choose one of the following:
•
If you want to enable user logins, go section
Adding a User Login below.
•
If you do not want to enable user logins, your
system is ready to use.
Adding a User Login
When you create a user login, the CPU login request
function is enabled. Users must log in to be able to
read and write configuration data.
To create a user login:
1. With EASY CPU started and a configuration file
open, click Edit in the dropdown menu bar.
2. Click User Logins… . The EASY CPU – Login
Manager dialog box appears.
Figure 49. Login Manager dialog
3. Click New User… . The Login Properties dialog
box appears (Figure 50).
Figure 50. Login Properties dialog
4. Complete the Login ID, Password, and Confirm
fields in the Login Properties dialog box for the
new user.
5. In the Access Level field, click on the scroll
buttons to choose the appropriate access level for
the new user (1 being the lowest level, 9 being the
highest level).
Note: The Access Level field is grayed out for the
first user so that user will have all administrator
privileges. This field is available to set access
levels for subsequent users.
CAUTION: Be sure that at least one user has an
access level of 9. Failure to maintain such a user
might lock users out of the system and require a
system reinstallation.
6. Click OK to save the new user properties or
Cancel to close the dialog box without saving the
properties.
7. Repeat this process for all users for whom logins
are desired.
Note: You also can modify or delete users in the
Login Properties dialog box whenever buttons are
not grayed out.
8. Be sure to save these changes and write the
modified configuration file to the CPU.
Note: With the user login function enabled, all newly
initiated program sessions will require users to log in
before reading or writing configuration data.