American Changer AC2002, Руководство по эксплуатации

Страница: 7 / 25

7
Figure 1 – Main Logic Board
Using the Dump Mode to Empty the Hoppers
1. Open the cabinet door.
2. Turn OFF the POWER switch.
3. Place a suitable container in front of the hoppers to catch the coins.
4. Press and hold the “DUMP” button on the upper right corner of the Main Logic Board. Turn ON the Power
switch. The red LED numbers on the main logic board will come on all “00000s.” Once the red “00000s”
lights up the SECOND time, release the “DUMP” button. If it is not released within one second, the
“DUMP” mode is canceled as a security feature.
5. The hoppers will dispense coins until the POWER switch is turned OFF. If the red LED numbers are not
counting up rapidly on the Main Logic Board’s display, the dump mode was not accessed. Please try
again.
The Dip Switches
The AC2002 changer is capable of dispensing coins in many different payout modes. Setting the coins out per
dollar is controlled by which dip switches are turned “ON." (Refer to Figure 1 for their location.) For example,
switch #2 is “ON” on both dip switches; therefore, the payout equals four coins per dollar (two coins per
hopper for one dollar).
D
B
C
G
BILL
METER
ON/OFF
SWITCH
EPROM
CHIP
PRIMARY
2½ AMP
FUSE
1
0
0 0 0 0 1
DUMP
BUTTON
TRANSFORMER
HOPPERS
HARNESS
CONNECTORS
AC LINE
CORD INPUT
VALIDATOR
CONNECTOR
ON
1 2 3 4 5 6 7 8
DIP
SWITCHES
Figure 2
This is not the dip switch bank for
setting the bill denominations.
(For those dip switches, refer to your
validator manual.)