Amek 51 Media Скачать руководство пользователя страница 89

Страница: 89 / 104

Wide

The

WIDE

switch changes the way the

Mix (LCR)

pan functions [Fig 4.1].

When panned Left, only Left is present, when panned Centre only Centre is present (L and R
completely attenuated) and when panned Right only Right is present.

1:1

The

1:1

switch in the

Channel

section bypasses the channel level and pan pots and causes the

Solo signal to become PFL (as opposed to AFL) [Fig 4.1].

This switch also routes the channel signal to busses 7-12, over-riding the

MIX TO TRACKS

and

AUX 3&4 TO TRACKS

switches.

The channel signal is also routed to busses 1-6 unless

LCRS

(busses 1-4) and

(busses 5-6) are

selected. All signals are still post-mute.

Pan Pots

The

FRONT/REAR

pot, pans between

LCR

and

Surround

busses.

When panned to the front, the

LCR

outputs are unity with no

and

outputs.

When panned to the centre, the

LCR

outputs are reduced by -3dBu, with the

and

signals

also reduced to -3dBu less than their unity gain, which is achieved with the

FRONT/REAR

pan

pot fully rear.

The

MIX PAN

is used to pan all

and

signals with the

and

signals attenuating by

-5dBu when panned centre, the centre signal being unity. When panned fully left or right, the
centre signal disappears.

When the

FRONT/REAR

pan pot is fully rear,

and

signals are unity when the

MIX

pan is

fully panned left or right.

When the

MIX

pan is panned to the centre, the

and

signals attenuate by -4dBu.

User Guide

Содержание 51 Media









































































































Результаты поиска

Содержание 51 Media

Отзывы:

Похожие инструкции для 51 Media

Бренды по названию

Популярные бренды

Amek 51 Media, Руководство пользователя

Результаты поиска

Содержание 51 Media

Отзывы:

Похожие инструкции для 51 Media

Бренды по названию

Популярные бренды