Amek 51 Media, Руководство пользователя

Страница: 64 / 104

D/P Mute / Input Cut
Note:
In this mode, the Lower Row Speaker Legends apply equally to both rows .
D/P Mute
In this mode, the upper switch row is dedicated to muting the
Direct/Playback sources and allows independent muting of incoming
signals. In addition, when changing to a different mode, the D/P
Mute/Input Cut switch LED remains ON but dimmed to indicate that
D/P Mutes are still active.
Note: D/P Mute
selections AND activations are
preserved when you change to a different
mode. You must return to this mode to change
a
D/P Mute condition.
Note: In 7.1 mode, the Nearfield switches become
D/P Mutes for speakers 7&8 .
Input Cut
The lower switches apply an Input Cut function within
the logic switching matrix to all incoming monitor
signals, whether derived internally or externally. These
switches may be applied independently.
Note: Input Cut selections AND activations are
preserved when you change to a different
mode. You must return to this mode to change an
Input Cut condition.
Note:
In 7.1 mode, the Nearfield switches become Input Cuts for speakers 7&8 and operate as
a pair.
62
User Guide
N
SPK
MUTE
INPUT
CUT
PLAY
BACK
SPK
SOLO
FORMAT
D/P
SOLO
D/P
MUTE DIRECT
MODE
SELECT
N
L R LFE/S C LS RS
MONO LCRS 5.1 STEREO 7.1 FILTER
D/P MUTE
N
Direct /
Playback
Select
D/P
Mute
Direct
Playback
Monitor Source Select
L R LFE/S C LS RS
MONO LCRS 5.1 STEREO 7.1 FILTER
INPUT
CUT
N
Input Cut Table
1 2 3 4 5 6 7 8
Format L C R LFE/S Ls Rs Lc Rc
ST OPEN T OPEN T T T X X
LCRS OPEN T OPEN X T T X X
5.1 OPEN T OPEN T T T X X
7.1 OPEN T OPEN T T T T T
OPEN
= always active;
X
= always cut;
T
= active by default, operator can toggle the setting;
X ( T )
= interactive toggle (specific to LCRS mode). By default speaker 4(LFE/S) is cut, speakers
5(Ls) & 6(Rs) are active. Opening speaker 4(LFE/S) forces 5(Ls) & 6(Rs) to cut and vice-versa.
N