Amek 51 Media, Руководство пользователя

Страница: 25 / 104

Insert Point
The insert point normally operates in the Mix Path and is positioned post-EQ.
Note:
Both Insert Send and Return signals are Unbalanced and fed to a single 1/4” (6.25mm)
jacksocket on the rear terminal panel. The jack Ring carries the Send signal with the
Return signal on the Tip .
Insert to Channel Path
Pressing the INS to CH switch places the Insert Poin t in the Channel Path .
Ø Phase
The Ø (Phase) Switch operates POST the Insert Point and reverses the phase of the Tape or Buss
Input . This switch should normally be released.
Note:
The Phase switch also moves to the Channel Path along with the Insert Point when the
INS to CH switch is operated, where it can be used to reverse the phase of the Mic/Line
input.
Mix Path Inputs
Buss
Pressing Buss switches the input source between the Tape and Buss input
signals, with Tape being the default Mix input source.
Mix Gain
The Mix Gain control adjusts the Buss/Tape input level with a range of +/-20dB.
Input Flip
The I/P Flip function swaps the input signals between both Channel and Mix paths, allowing the
Mic/Line signal to be fed to the Mix Path instead of the Tape/Buss signal and vice-versa.
Meter Off Channel
Normally, the LED bargraph meter (in the meterbridge above the module) reads the Mix Path
(Tape or Buss) pre-gain signal. Operating the Meter Off Chan switch causes the meter to follow
the Channel Path (Mic or Line ) signal, post-gain pre-fader.
23
User Guide
N
N
METER
OFF
CHAN
BUSS
GAIN
I/P
FLIP
+20 -20
0
MIX
O
/
INS
CH