manualshive.com logo in svg

AMD Elan SC520, Руководство пользователя, Страница: 95 / 444

Поделиться
Скачать
AMD Elan SC520 Скачать руководство пользователя страница 95

System Address Mapping

Élan™SC520 Microcontroller User’s Manual

4-17

The Configuration Base Address (CBAR) register (Port FFFCh) can be used to alias the 
internal memory-mapped registers and peripherals to a convenient location. For example, 
they could be mapped between 640 Kbytes and 1 Mbyte for real mode operation. The 
memory-mapped configuration region is always available in the upper CPU space 
(4 Gbytes), but the aliased location is only accessible when the CBAR is programmed and 
the ENABLE bit has been set.

4.3.5.4.3

DMA Channel and Interrupt Request Steering

The ÉlanSC520 microcontroller provides a method to route interrupt request sources and 
DMA request pins to the appropriate channels on the programmable interrupt controller 
(PIC) and the GP-DMA controller, respectively.

See Chapter 15, “Programmable Interrupt Controller”, for further information on interrupt 
request routing.

See Chapter 14, “GP Bus DMA Controller”, for further information on DMA request routing.

4.3.5.5

Configuring PCI Bus Devices

PCI bus device configuration is accomplished in the ÉlanSC520 microcontroller with the 
standard PCI Configuration Mechanism #1, as defined in the 

PCI Local Bus Specification, 

Revision 2.1. This configuration requires an indirect mapped I/O scheme in which the 
address of the device is written to the PCI Configuration Address (PCICFGADR) register 
(Port 0CF8h), and the data is accessed via the PCI Configuration Data (PCICFGDATA) 
register (Port 0CFCh). See“Configuration Information” on page 9-9 for more information. 
See also the 

PCI Local Bus Specification, Revision 2.2.

4.3.6

Interrupts

The ÉlanSC520 microcontroller can be programmed to generate an interrupt request when 
a write protection violation occurs, providing software with a debugging mechanism to 
determine which task illegally attempted to write to the memory region marked with this 
attribute. In this case, an interrupt request is generated to the programmable interrupt 
controller (PIC) block, where the request is routed to the appropriate type of interrupt 
(maskable or non-maskable) and level, based on the programming of the configuration 
registers. The PAR window that contains the address region where the write protect violation 
occurred is latched into a register, as well as which bus owner caused the violation (CPU, 
GP-DMA controller, or PCI bus master). 

See Chapter 15, “Programmable Interrupt Controller”, for details of PIC programming.

4.3.7

Software Considerations

Since the ÉlanSC520 microcontroller provides some flexibility in defining the system 
memory and I/O map, there are a number of software considerations that must be analyzed. 
The list below describes some of the issues that must be considered when programming 
the configuration registers to define the memory and I/O space in an ÉlanSC520 
microcontroller system.

■

The Configuration Base Address (CBAR) register must be accessed as a 32-bit I/O 
register to guarantee that all bits are written at the same time. The MATCH field of the 
CBAR must be written with the correct pattern to enable 

or disable the MMCR alias.

■

MMCR register space has higher priority than the Programmable Address Region (PAR) 
registers.

■

The PAR registers are organized such that the lowest register (PAR 0) is the highest 
priority and the last PAR register (PAR15) is lowest priority. Therefore, if two PAR 
registers are overlaid due to programming, the lowest numbered PAR takes priority.

Содержание Elan SC520





























































































































































































































































































































































































































































Отзывы:

Нет отзывов