manualshive.com logo in svg

AMD Elan SC520, Руководство пользователя, Страница: 90 / 444

Поделиться
Скачать
AMD Elan SC520 Скачать руководство пользователя страница 90

System Address Mapping

4-12

Élan™SC520 Microcontroller User’s Manual

This PCI configuration space is accessible 

only by the CPU in the ÉlanSC520 

microcontroller, and the I/O cycle is claimed by the PCI bus configuration register block.

As a target, the ÉlanSC520 microcontroller does not accept any PCI bus configuration 
space accesses from other PCI bus masters.

Host-bridge-specific PCI configuration registers are described in the 

Élan™SC520 

Microcontroller Register Set Manual, order #22005. See also the PCI Local Bus Specification, 
Revision 2.2, for details on PCI bus device configuration register programming.

4.3.4.3

PCI I/O Space

The CPU’s I/O cycles can be directed to the PCI bus for normal direct-mapped access of 
devices, with the following restrictions:

■

I/O addresses claimed by the integrated PC/AT peripherals and the CBAR cannot be 
forwarded to the PCI bus under any conditions. See the I/O map in Figure 4-3 on 
page 4-11 and Table 4-5 on page 4-13 for details of the I/O addresses that are claimed 
by the integrated peripherals. 

■

By default, the “holes” in this portion of the I/O address space (0000–03FFh) are 
forwarded to the external GP bus. The Address Decode Control (ADDDECCTL) register 
(MMCR offset 80h) can be configured to forward accesses to these holes to the PCI 
bus. A PAR register is not required for this.

■

I/O addresses implemented by PCI bus configuration space (0CFC–0CFFh) are only 
forwarded to the PCI bus as an I/O cycle when the ENABLE bit in the PCI Configuration 
Address (PCICFGADR) register is cleared to 0. Otherwise, they are forwarded as a PCI 
configuration cycle. Ports 0CF8–0CFBh are forwarded to the PCI bus as I/O transactions 
only for non-doubleword accesses to this region; otherwise, they are claimed by the host 
bridge as a PCI configuration cycle.

All other CPU I/O cycles are, by default, forwarded to the PCI bus as normal PCI I/O 
transactions. PAR registers can be enabled to direct portions of this region to the GP bus.

As a target, the ÉlanSC520 microcontroller does not accept any I/O space accesses from 
PCI bus masters.

4.3.4.4

PC/AT-Compatible I/O Peripherals Region

The ÉlanSC520 microcontroller includes several integrated peripheral cores that are 
PC/AT compatible, including the DMA controller, programmable interrupt controller (PIC), 
programmable interval timer (PIT), UARTs, real-time clock, and various control/status 
registers. These I/O addresses are automatically decoded by the ÉlanSC520 
microcontroller’s address decoding logic and require no special setup or PAR registers. 
Table 4-5 summarizes the I/O map for these integrated peripherals.

There are 

holes in this region, which are I/O transactions in the lower 1-Kbyte region that 

not claimed by the ÉlanSC520 microcontroller’s internal peripherals. These addresses can 
be decoded externally, or, if a chip select is required, a PAR register can be programmed 
for these addresses.

■

By default, all of the accesses to holes in this portion of the I/O address space (0000h 
to 03FFh) are forwarded to the external GP bus.

■

To forward all accesses to the PCI bus, the IO_HOLE_DEST bit in the Address Decode 
Control (ADDDECCTL) register (MMCR offset 80h) can be set.

Содержание Elan SC520





























































































































































































































































































































































































































































Отзывы:

Нет отзывов