manualshive.com logo in svg

AMD Elan SC520, Руководство пользователя

AMD Elan SC520 - мощный встроенный процессор, предназначенный для широкого спектра применений. Получите бесплатное пользовательское руководство на manualshive.com, чтобы узнать все возможности и функции этого устройства. Скачать руководство сейчас и ознакомьтесь с подробной информацией об AMD Elan SC520.

Поделиться
Скачать
background image

Pin Information

2-10

Élan™SC520 Microcontroller User’s Manual

SSI_CLK

—

O

SSI Clock is driven by the ÉlanSC520 microcontroller SSI port during 
active SSI transmit or receive transactions. The idle state of the clock 
and the assertion/sample edge are configurable.

SSI_DI

—

STI

SSI Data Input receives incoming data from a peripheral device SSI 
port. Data is shifted in on the opposite SSI_CLK signal edge in which 
SSI_DO drives data. SSI_DO and SSI_DI can be tied together to 
interface to a three-pin SSI peripheral.

SSI_DO

—

OD

SSI Data Output drives data to a peripheral device SSI port. Data is 
driven on the opposite SSI_CLK signal edge in which SSI_DI latches 
data. The DO signal is normally at high-impedance when no transmit 
transaction is active on the SSI port.

Timers

PITGATE2

[GPCS3]

I

Programmable Interval Timer 2 Gate provides control for the PIT 
Channel 2.
Programmable Interval Timer 2 Output is output from the PIT 
Channel 2. This signal is typically used as the PC speaker signal.

PITOUT2

{CFG3}

O

TMRIN0

[GPCS5]

I

Timer Inputs 0 and 1 can be programmed to be the control or clock 
for the general-purpose (GP) timers 0 and 1. 

TMRIN1

[GPCS4]

I

TMROUT0

[GPCS7]

O

Timer Outputs 0 and 1 are outputs from two of the GP timers. These 
outputs can be used as pulse-width modulation signals.

TMROUT1

[GPCS6]

O

Clocks and Reset

32KXTAL2–
32KXTAL1

—

osc

32.768-kHz Crystal Interface is used for connecting an external 
crystal or oscillator to the ÉlanSC520 microcontroller. This clock 
source is used to clock the real-time clock (RTC). In addition, internal 
PLLs generate clocks for the timers and UARTs based on this clock 
source. When an external oscillator is used, 32KXTAL1 should be 
unconnected and the clock source driven on 32KXTAL2. 

33MXTAL2–
33MXTAL1

—

osc

33-MHz Crystal Interface is the main system clock for the chip. This 
clock source is used to derive the SDRAM, CPU, and PCI clocks.
When an external oscillator is used, 33MXTAL1 should be grounded 
and the clock source driven on 33MXTAL2. 

[CLKTEST]

CLKTIMER

O

Test Clock Output is a shared pin that allows many of the internal 
clocks to be driven externally. CLKTEST can drive the internal clocks 
of the UARTs, PLL1, PLL2, the programmable interval timer (PIT), or 
the real-time clock (RTC) for testing or for driving an external device. 

CLKTIMER

[CLKTEST]

I

Timer Clock Input is a shared clock pin that can be used to input a 
frequency to the programmable interval timer (PIT).

LF_PLL1

—

I

Loop Filter Interface is used for connecting external loop filter 
components. Component values and circuit descriptions are contained 
in the 

Élan™SC520 Microcontroller Data Sheet, order #22003. 

PRGRESET

—

STI

Programmable Reset can be programmed to reset the ÉlanSC520 
microcontroller, but allow SDRAM refresh to continue during the reset. 
This allows the system to be reset without losing the information stored 
in SDRAM. On power-up, PRGRESET is disabled and must be 
programmed to be operational. When disabled, this pin has no effect 
on the ÉlanSC520 microcontroller. 

PWRGOOD

—

STI

Power Good is a reset signal that indicates to the ÉlanSC520 
microcontroller that the V

CC

 levels are within the normal operation 

range. It is used to reset the entire chip and must be held Low for one 
second after all V

CC 

signals (except VCC_RTC) on the chip are High. 

This signal must be returned Low before the V

CC

 signals degrade to 

put the RTC into the correct state for operation in RTC-only mode.

Table 2-2

Signal Descriptions (Continued)

Signal

Multiplexed 

Signal Type

Description

Содержание Elan SC520





























































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Elan SC520

IBM ServeRAID M5014 User Manual preview
ServeRAID M5014
Бренд: IBM Страницы: 106
NEC 78K0S/KA1+ Preliminary User'S Manual preview
78K0S/KA1+
Бренд: NEC Страницы: 304
Fairchild 1600A Installation, Operation And Maintenance Instructions preview
1600A
Бренд: Fairchild Страницы: 2
Fairford synergy User Manual preview
synergy
Бренд: Fairford Страницы: 233
Icar RPC 8BGA Operating Manual preview
RPC 8BGA
Бренд: Icar Страницы: 40
Icar RPC 8BGA Complete Manual preview
RPC 8BGA
Бренд: Icar Страницы: 86
Icar RPC 8BGA Instruction Manual preview
RPC 8BGA
Бренд: Icar Страницы: 39
Fagor G2-MA Manual preview
G2-MA
Бренд: Fagor Страницы: 8
Samson 2371-10 Mounting And Operating Instructions preview
2371-10
Бренд: Samson Страницы: 36
G-Tech FIELD MATE User Manual And Installation Manual preview
FIELD MATE
Бренд: G-Tech Страницы: 26
H3C WX1804H-PWR Quick Start Manual preview
WX1804H-PWR
Бренд: H3C Страницы: 15
Omega CN32Pt User Manual preview
CN32Pt
Бренд: Omega Страницы: 20
H3C WX2560H Installation, Quick Start preview
WX2560H
Бренд: H3C Страницы: 3
Broan VBATHW Installation And User Manual preview
VBATHW
Бренд: Broan Страницы: 2
Linx Technologies HumPRO Series Quickstart Reference preview
HumPRO Series
Бренд: Linx Technologies Страницы: 2
Resol DeltaSol SLL Installation, Operation, Maintenance Manual preview
DeltaSol SLL
Бренд: Resol Страницы: 60
Sensor Access IC2001 Manual preview
IC2001
Бренд: Sensor Access Страницы: 11
Yatai PKC1 Series Operating Instruction preview
PKC1 Series
Бренд: Yatai Страницы: 7

Бренды по названию

Популярные бренды

Загрузить еще бренды