Amcrest IP2M-853E Скачать руководство пользователя страница 86

Страница: 86 / 97

To search the PC for a firmware file, click the Browse button. To upgrade once the firmware file is selected, click

Upgrade.

Note: When upgrading the camera’s firmware, do not disconnect the internet or power fro

m the camera.

5.4.6 Information

This menu section allows the user to view information about the camera for reference purposes.

5.4.6.1 Version

This screen allows the user to see various information about the camera’s software versions, as well as o

ther

information. Below is a screenshot of the camera’s version screen:

On this screen, software version, web interface version, and ONVIF version are displayed. Also, the S/N (Token ID)

is displayed here.

5.4.6.2 Log

This screen is where the camera

’s activity log is kept. Below is a screenshot of the Log screen:

Содержание IP2M-853E

































































































Результаты поиска

Содержание IP2M-853E

Отзывы:

Бренды по названию

Популярные бренды

Amcrest IP2M-853E, Руководство пользователя

Результаты поиска

Содержание IP2M-853E

Отзывы:

Бренды по названию

Популярные бренды