65
o
The sixth column shows the status of the protocol. If the protocol was mapped successfully, this field
will say “Mapping Succeeded”.
o
The seventh column allows the user to open a dialog box and
edit the service’s information.
To see how to setup the camera for remote access, see section 4.7.
To reset to default settings, click the Reset Defaults button. To refresh the page, click the Refresh button. To save
the settings, click the Save button.
5.4.2.8 SNMP
SNMP stands for Simple Network Management Protocol. This protocol is used to provide a basic framework in
order to allow connection between various network devices. Below is a screenshot of the SNMP settings screen:
Below is an explanation of fields on the SNMP settings screen:
•
SNMP Version:
These checkboxes allow the user to select the SNMP version to use.
•
SNMP Port:
This field allows the user to write in a port for SNMP to use. The port can range from anywhere
from 1 to 65535.
•
Read Community:
This field shows which SNMP community has read access.
•
Write Community:
This field shows which SNMP community has write access.
•
Trap Address:
This field allows the user to write in a trap address.
•
Trap Port:
This field allows the user to write in a trap port number. The trap port number should not be the
same as the SNMP port.
To reset to default settings, click the Reset Defaults button. To refresh the page, click the Refresh button. To save
the settings, click the Save button.
