Amcrest IP2M-853E Скачать руководство пользователя страница 70

Страница: 70 / 97

•

Working Period

: Clicking this button opens a weekly schedule that can be used to set times.

Click and drag to set video tampering for certain days of the week. Also, periods of video tampering
can be set for each day and enabled using the period settings on the bottom half of the screen. There
are a total of 6 periods that can be set.

•

Record

: This checkbox allows the user to enable the camera to record video when a video tampering alarm is

triggered.

•

Record Delay

: This field specifies in seconds how long the delay between alarm activation and recording

should be.

•

Relay Out

: This checkbox allows the user to enable the camera to trigger a connected alarm (connected to the

alarm port on the back of the camera) when a video tamper alarm is triggered.

•

Alarm Delay

: This field specifies in seconds how long the delay between alarm activation and Relay alarm

activation should be.

•

Send Email

: This checkbox allows the user to enable the camera to send an email when a video tampering

alarm is triggered.

•

PTZ

: This checkbox allows the user to enable the camera to activate a PTZ tour when a video tampering alarm

is triggered.

•

Snapshot

: This checkbox allows the user to enable the camera to take a snapshot when a video tampering

alarm is triggered.

To reset to default settings, click the Reset Defaults button. To refresh the page, click the Refresh button. To save

the settings, click the Save button.

5.4.3.2 Audio Detection

This menu allows the user to modify audio detection settings. Below is a screenshot of the Audio Detect screen:

Содержание IP2M-853E

































































































Результаты поиска

Содержание IP2M-853E

Отзывы:

Бренды по названию

Популярные бренды

Amcrest IP2M-853E, Руководство пользователя

Результаты поиска

Содержание IP2M-853E

Отзывы:

Бренды по названию

Популярные бренды