en
5
The Ambu King Mask is available in 7 sizes (#1, #2, #3, #4, #5, #6, #7RD). The mask cushion and cushion base is colored
according to whether it is unscented (blue), fresh scented (green), bubble gum scented (purple), strawberry scented
(pink) or cherry scented (red). The mask includes a check valve to either add or remove air in the cushion and size #3, #4,
#5, #6 and #7RD is available with or without a hook ring.
3. Explanation of symbols used
Symbol indications
Description
Symbol indications
Description
CN
Country of Manufacturer
Single Patient Multiple Use
Medical Device
MR Safe
A full list of symbol explanations can be found on ambu.com/symbol-explanation.
4. Product use
4.1. Inspection and preparation
1. Remove the Ambu King Mask from its packaging and inspect the device. In case of damage, dirt or deformation
discard the mask.
2. Check the cushion’s inflation for appropriate fit and seal to the patient’s face.
3. The hook ring, if present, may be removed if not needed.
4. To adjust the cushion inflation, use a syringe into the check valve to inflate/remove air to achieve the desired
cushion pressure.
4.2. Operation
1. Connect the mask to the breathing equipment or anesthetic circuit by pressing the conical connectors together.
2. Apply the mask firmly to the patient’s face to achieve a tight seal.
3. Hold the mask tightly against the patients face while securing an open airway through a CE grip or alike.
4. If deemed necessary, the surface of the product can be manually cleaned with water and a mild detergent. Rinse
thoroughly with clean water. Allow to dry and check that the Ambu King Mask is fully operational before reuse on
the same patient. If not fully operational, the mask shall be discarded.
4.3. After use
Used products must be disposed of according to local procedures.
5.Technical product specifications
5.1. Specifications
Ambu King Mask sizes
#1, #2, #,3, #4, #5, #6, #7RD.
Connector size
15 mm OD connector for #1 and #2 according to EN ISO 5356-1.
22 mm ID connector for #3, #4, #5, #6 and #7RD according to EN ISO 5356-1.
Check valve
Compatible with Luer slip syringe.
Operation temperature limits
-20 °C to +50 °C (-4 °F to +122 °F) according to EN 1789.
Storage temperature limits
-40 °C to +70 °C (-40 °F to +158 °F) according to EN 1789 and EN ISO 10651-4.
Recommended long term storage in closed packaging at room temperature, away from sunlight.
5.2. MRI Safety information
The Ambu King Mask is MR Safe.
