Amazone UG 2200 Special, Руководство по эксплуатации

Страница: 191 / 252

Faults
11 Faults
WARNING
Risk of crushing, shearing, cutting, being caught and/or drawn
in, or impact through
•
unintentional falling of the machine raised using the trac-
tor's three-point linkage.
•
unintentional falling of raised, unsecured machine parts.
•
unintentional start-up and rolling of the tractor-machine
combination.
Secure the tractor and the machine against unintentional start-up and
rolling before eliminating faults on the machine. See page 140.
Wait for the machine to stop before entering the machine danger
area.
Fault Cause Remedy
There is no suction from the
pump
Blockage on the suction side
(suction filter, filter insert, suction
hose).
Remove the blockage.
Pump is sucking in air.
Check the hose connection of the
suction hose (optional) on the
suction port for leak tightness.
The pump does not have any
power Suction filter and filter insert dirty. Clean suction filter and filter in-
sert.
The valves are jammed or dam-
aged.
Change the valves.
Pump is sucking in air, recog-
nisable from the air bubbles in
the spray liquid tank.
Check the hose connections on
the suction hose for leak tight-
ness.
The spray cone vibrates
Irregular delivery flow from the
pump.
Check, and if necessary replace,
the suction and pressure-side
valves (see Seite 224).
Oil/spray liquid mixture in the
oil filler neck or clearly visible
consumption of the oil
Pump diaphragm defective.
Change all six piston diaphragms
(see 226).
The required spray rate en-
tered is not achieved High operational speed; low
pump drive speed;
Reduce travel speed and in-
crease the pump drive speed
until the fault message goes off.
There has been a deviation
from the permissible spray
pressure range for the nozzle
fitted to the sprayer boom Deviation from the prescribed
operational speed, which has an
effect on the spray pressure
Alter your operational speed to
return to the prescribed opera-
tional speed range set for spray-
ing operation
BAG0021.14 05.19 191