Amazone UG 2200 Special, Руководство по эксплуатации

Страница: 54 / 252

Structure and function
The piston diaphragm pump (2) draws the spray liquid from the spray
liquid tank (1) via the VARIO switch tap, suction side (A), the suction
line (3) and the suction filter (4). The spray liquid which is drawn up is
conveyed via the pressure hose (5) to the VARIO switch tap, pressure
side (B). The liquid reaches the pressure gauge via the VARIO switch
tap, pressure side (B). The pressure gauge consists of the spray
pressure control (6) and the self cleaning pressure filter (7). From the
pressure gauge, the spray liquid is conveyed via the flow meter (8) to
the part width section valves (9). The part width section valves take
on the task of distributing the liquid to the individual spray lines (10).
The return flow meter (11) (control terminal only) determines the
quantity of spray liquid to be conveyed back to the spray liquid tank in
the case of a low application rate.
In its switched-on state, the agitator (12) ensures that the spray liquid
in the spray liquid tank remains homogenous. The stirring perfor-
mance of the agitator can be set at the setting tap (C- Additional agi-
tator, G Main agitator only with UG Super).
The field sprayer is operated from the tractor via
•
the AMATRON 3 control terminal (13) or
•
the AMASPRAY
+
control terminal.
To prepare the spray liquid, fill the induction bowl (14) with the agent
quantity required to fill the spray liquid tank, and draw it into the spray
liquid tank.
The fresh water from the flushing water tank (15) is used for cleaning
the spraying system.
54 BAG0021.14 05.19