10.1.9 Replacing the C-Mix-3 Clip coulter
INTERVAL
as required
WARNING
Risk of crushing due to lowering of the
implement
Raise the implement only slightly.
1.
Release the coulter locking mechanism in the
direction shown by the arrow.
2.
Pull out the coulter locking mechanism.
3.
Use a hammer and the C-Mix-3 Clip assembly
iron to remove the C-Mix-3 Clip coulter tip.
4.
Put on the new C-Mix-3 Clip coulter tip.
5.
Hammer on the C-Mix-3 Clip coulter tip with a
hammer and the C-Mix-3 clip assembly iron.
6.
Slide in the coulter locking mechanism.
7.
Secure the coulter locking mechanism in the
direction of the arrow.
CMS-I-00003076
10.1.10 Checking the levelling connection
INTERVAL
After initial operation
Check the bolts
1
for tightness.
1
CMS-I-00004872
CMS-T-00004185-C.1
CMS-T-00006960-B.1
10 | Repairing the implement
Maintaining the implement
MG7242-EN-GB | L.1 | 26.07.2022 | © AMAZONE
83
