manualshive.com logo in svg

Amazone Ceus 3000-TX, Оригинальное руководство по эксплуатации

Поделиться
Скачать
Amazone Ceus 3000-TX Скачать руководство пользователя страница 60

REQUIREMENTS

The implement is coupled

The implement is aligned horizontally

The tine array is set to the shallowest working
depth

 

IMPORTANT 

 

Damage due to spacer elements not being
used or not used properly

The implement can be damaged if the spacer
elements are not swivelled in or out or
are not swivelled in or out properly after
dismounting the roller or before mounting the
roller.

Always swivel the spacer elements in
or out on both running gear hydraulic
cylinders.
Always swivel the spacer elements in
after dismounting the roller, and always
swivel them out before mounting the
roller.
After swivelling in the spacer elements,
make sure that the recesses of the spacer
elements are always fully resting on the
piston rods.

 

1.

Lower the running gear into transport position
using the "yellow 2" tractor control unit.

2.

Pull the linch pin 

3

 out of the front pin of the

double pin 

1

.

3.

Pull down the double pin and swivel away the

spacer elements 

2

 from the piston rod 

4

 of

the running gear hydraulic cylinder until all of the
spacer elements are swivelled out.

4.

Push the double pin all the way up again.

5.

Secure the double pin on the front pin again with
the linch pin.

6.

Repeat steps 2 to 5 on the second running gear
hydraulic cylinder.

1

2

3

4

CMS-I-00004837

6 | Preparing the machine

Preparing the implement for operation 

MG7242-EN-GB | L.1 | 26.07.2022 | © AMAZONE

54

Содержание Ceus 3000-TX















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды