9.
When the desired working depth has not been
reached yet,
repeat the procedure.
10. Fasten the setting lever in the parking position.
6.3.11 Preparing the edge levelling discs for operation
6.3.11.1 Adjusting the edge levelling discs
The working depth and penetration angle of the edge
levelling discs are adjusted to prevent the formation of
soil ridges during operation.
1.
Raise the implement.
2.
Loosen the bolts
1
.
The bearing journal and the hub of the edge levelling
disc
3
serve as handles.
3.
Turn the edge levelling disc to the desired
position.
4.
Tighten the bolts
1
.
5.
Loosen the bolts
2
.
6.
Move the edge levelling disc disc up or down.
7.
Tighten the bolts
2
.
2
3
1
CMS-I-00003276
6.3.11.2 Moving the edge levelling discs manually
1.
Pull out the pin
1
.
2.
Slide the edge levelling disc
2
to the desired
position.
3.
Secure the edge levelling disc with a pin.
4.
Secure the pin with a linch pin.
1
2
CMS-I-00004690
CMS-T-00006831-B.1
CMS-T-00004545-D.1
CMS-T-00006610-C.1
6 | Preparing the machine
Preparing the implement for operation
MG7242-EN-GB | L.1 | 26.07.2022 | © AMAZONE
64
