10.1.4 Checking the disc carrier rubber O-rings
INTERVAL
Every 12 months
1.
Perform a visual check of the disc carrier rubber
O-rings
1
.
2.
If the disc carrier rubber O-rings are damaged,
have the disc carrier rubber O-rings replaced by a
specialist workshop.
1
1
1
CMS-I-00004870
10.1.5 Aligning the disc gangs relative to each other
INTERVAL
as required
The disc gangs are aligned relative to each other
using adjustment spindles.
The alignment of the disc gangs is suitable for the
following:
Optimising the working depth of the disc gangs
relative to each other
Correcting lateral pull of the implement
Preventing uneven wear of the discs
1.
Align the implement horizontally.
2.
Set the working depth of the disc gangs to the
smallest value.
The discs are not standing on the ground.
3.
Loosen the lock nuts
1
on all of the adjustment
spindles.
4.
Align the disc gangs using the hexagonal profile
2
on the adjustment spindle.
1
2
CMS-I-00003204
CMS-T-00006927-B.1
CMS-T-00004786-C.1
10 | Repairing the implement
Maintaining the implement
MG7242-EN-GB | L.1 | 26.07.2022 | © AMAZONE
80
