manualshive.com logo in svg

Amazone Ceus 3000-TX, Оригинальное руководство по эксплуатации

Поделиться
Скачать
Amazone Ceus 3000-TX Скачать руководство пользователя страница 74

 

WARNING 

 

Risk of crushing

Swivel the side discs carefully to the
desired position.

 

2.

Swivel up the side disc 

2

.

3.

Secure the side disc with the locking hook 

1

.

4.

Prepare the side disc on the other side of the disc
gang for road travel in the same way.

1

2

CMS-I-00004819

6.4.3 Putting on the road safety bars

1.

Remove coarse dirt from the tines.

2.

Push the road safety bars 

1

 over the tines.

3.

Secure the road safety bars with the tensioners

2

.

4.

Check for firm seating.

5.

If the tensioners do not provide enough tension,

guide the tensioner through the tine coils.

CMS-I-00000517

6.4.4 Aligning the implement horizontally

A spirit level is attached to the implement frame. The
spirit level shows the alignment of the implement in
the direction of travel.

1.

Drive the tractor and implement onto a level
surface.

2.

Align the implement horizontally using the lower
links.

6.4.5 Locking the tractor control units

Depending on the equipment, the tractor control
units are locked mechanically or electrically.

CMS-T-00000614-C.1

CMS-T-00006812-A.1

CMS-T-00006337-C.1

6 | Preparing the machine

Preparing the machine for road travel 

MG7242-EN-GB | L.1 | 26.07.2022 | © AMAZONE

68

Содержание Ceus 3000-TX















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды