REQUIREMENTS
The implement is coupled
The implement is aligned horizontally
The tine array is set to the shallowest working
depth
1.
Lower the running gear into transport position
using the "yellow 2" tractor control unit.
2.
If the roller holder is not in the parking position
on the roller for single rollers:
Screw on the mount
1
for the roller holder onto
the roller.
3.
Insert the parking legs
3
of the roller holder into
the mount.
4.
Secure the parking legs with the linch pins
2
.
5.
Raise the running gear into working position
using the "yellow 1" tractor control unit, until the
parking legs of the roller holder are standing on
the ground.
1
2
3
CMS-I-00004834
6.
Unscrew the bolted connections
1
on the roller
mounts
2
.
7.
Remove the clamping brackets
3
and bolted
connections.
8.
Lower the running gear into transport position
using the "yellow 2" tractor control unit.
9.
Drive the implement away from the roller.
1
2
3
CMS-I-00004821
6 | Preparing the machine
Preparing the implement for operation
MG7242-EN-GB | L.1 | 26.07.2022 | © AMAZONE
52
