manualshive.com logo in svg

Amazone CatrosXL 3003, Оригинальное руководство по эксплуатации

Поделиться
Скачать
Amazone CatrosXL 3003 Скачать руководство пользователя страница 64

9.2 Uncoupling the 3-point mounting frame

1.

Park the implement on a level surface with solid
ground.

2.

Release the top link 

1

.

3.

Uncouple the top link 

1

 from the implement.

4.

Release the lower links 

2

.

5.

Uncouple the lower links 

2

 from the implement

from the tractor seat.

CMS-I-00001249

9.3 Driving the tractor away from the implement

There must be enough space between the tractor and
implement so that the supply lines can be uncoupled
without obstructions.

Drive the tractor away from the implement,
leaving a sufficient distance.

CMS-I-00004044

9.4 Uncoupling the power supply

1.

Pull out the plug 

1

 for the power supply.

1

CMS-I-00001048

CMS-T-00001401-C.1

CMS-T-00005795-A.1

CMS-T-00001402-D.1

9 | Parking the machine

Uncoupling the 3-point mounting frame 

MG6158-EN-II | H.1 | 30.04.2021

60

Содержание CatrosXL 3003



















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды