6.3.2.4 Adjusting the working depth of the straw harrow
6.3.2.4.1 Manually adjusting the working depth of the straw harrow
1.
Fold up the safety clip
2
.
2.
Use the crank
3
to change the working depth.
3.
Read the working depth on the read-off edge
1
of the scale.
4.
When the desired working depth has been set,
Secure the crank with the safety clip.
2
3
1
CMS-I-00004788
6.3.2.4.2 Hydraulically adjusting the working depth of the straw harrow
The arrow
1
on the scale
2
shows the set working
depth.
NOTE
The scale value only serves for orientation. The
scale value does not represent the working depth
in centimetres.
Adjust the working depth hydraulically using the
"beige" tractor control unit.
1
2
CMS-I-00002447
6.3.2.4.3 Adjusting the aggressiveness of the straw harrow
1.
Pull out both linch pins of a harrow beam.
2.
Turn the harrow beam to the desired position.
3.
Secure the harrow beam with a linch pin.
CMS-I-00003549
CMS-T-00006810-A.1
CMS-T-00006811-A.1
CMS-T-00004875-B.1
CMS-T-00004959-B.1
6 | Preparing the machine
Preparing the implement for operation
MG6158-EN-II | H.1 | 30.04.2021
43
