6.3.3.2 Adjusting the track width of the wheel mark eradicator
1.
Loosen the nuts for the clamp connection
2
.
2.
Move the wheel mark eradicator bracket
1
to
the desired position.
3.
Tighten the nuts.
4.
After 5 hours of operation, check the bolt
connection for tight fit.
1
2
CMS-I-00000943
6.3.3.3 Replacing the wheel mark eradicator coulter
Different wheel mark eradicator coulters can be
installed on the wheel mark eradicator . The choice
of the wheel mark eradicator coulter depends on the
operating conditions.
CMS-I-00001967
Number
Wheel mark eradicator
coulter
Operating conditions
Pulling force requirement
1
Wing coulter
Shallow loosening and levelling of
medium, silty soils
High pulling force
requirement
2
Heart-shaped coulter
Medium-depth loosening of various soils
Medium pulling force
requirement
3
Narrow coulter
Deep loosening of light soils
Low pulling force
requirement
CAUTION
Risk of injury from sharp edges on the
coulters and the bolt heads
Wear gloves.
Pay attention to sharp edges.
Do not allow carriage bolts to rotate.
CMS-T-00001553-B.1
CMS-T-00002425-C.1
6 | Preparing the machine
Preparing the implement for operation
MG6158-EN-II | H.1 | 30.04.2021
48
