8.1 The wheel mark eradicator does not reach the desired working depth.
When the worn tine has been replaced, the working depth of the soil tillage implement
must be corrected. The wheel mark eradicator brackets are too high above the soil
1.
To allow the wheel mark eradicators
1
to
work deeper,
rotate the wheel mark eradicator bracket
2
by
180 degrees.
2
1
CMS-I-00003357
2.
Release both linch pins and locking pins
2
.
3.
Release the linch pin
3
.
4.
Hold the wheel mark eradicator
1
.
5.
Remove the locking pin.
6.
Remove the wheel mark eradicator.
1
2
3
CMS-I-00003340
7.
Loosen and remove the nuts for the clamp
connection
2
.
8.
Remove the wheel mark eradicator bracket
1
.
2
1
CMS-I-00003338
CMS-T-00005076-A.1
8 | Eliminating faults
MG6158-EN-II | H.1 | 30.04.2021
55
