Using the machine
7
7.1 Using the implement
1.
Lower the implement on the field.
2.
Move the hydraulic system of the 3-point power
lift into float position.
7.2 Lowering the cutting roller
1.
Open the stop tap.
2.
Lower the cutting roller using the "beige" tractor
control unit.
3.
To build up the hydraulic preloading,
hold the "beige" tractor control unit for 20
seconds.
4.
Put the tractor control unit in float position.
CMS-I-00004475
7.3 Turning on the headlands
1.
To prevent lateral loads when driving in curves
on the headlands,
raise the soil tillage tools.
2.
When the direction of the implement matches
that of the direction of travel,
lower the soil tillage tools.
CMS-T-00000071-C.1
CMS-T-001727-C.1
CMS-T-00006284-A.1
CMS-T-001728-B.1
7 | Using the machine
MG6158-EN-II | H.1 | 30.04.2021
53
