1.
Remove the nuts
1
.
2.
Remove the bolts
1
.
3.
Install the desired wheel mark eradicator coulter
2
on the tool carrier.
4.
Install the bolts
3
.
5.
Install the nuts and tighten them.
6.
After 5 hours of operation, check the bolt
connection for tight fit.
1
2
3
CMS-I-00001080
6.3.4 Installing ballast weights
The ballast weights optimise the penetration of the
discs into the soil under dry and extremely hard soil
conditions. One set of ballast weights consists of 4
elements, each with a weight of 25 kg.
1.
Screw on the bracket
1
for the ballast weights
with the clamp
2
at the centre of the rear frame
carrier.
CMS-I-00000643
2.
Put two ballast weights
1
on each bracket.
3.
Screw two ballast weights together respectively.
CMS-I-00000533
6.3.5 Adjusting the scraper to the roller
The scrapers on the roller are set at the factory. The
scrapers can be adapted to the working conditions.
CMS-T-00000069-D.1
CMS-T-00000076-C.1
6 | Preparing the machine
Preparing the implement for operation
MG6158-EN-II | H.1 | 30.04.2021
49
