6.3.2.5 Adjusting the working depth of the crushboard
6.3.2.5.1 Manually adjust the working depth of the crushboard
1.
Remove the linch pin
1
.
2.
Use the crank
2
to change the working depth.
3.
Read the working depth on the read-off edge
3
of the scale
4
.
4.
When the desired working depth has been set,
secure the crank with a linch pin.
2
4
3
1
CMS-I-00002053
6.3.2.5.2 Hydraulic adjustment of the crushboard working depth
The set working depth is shown on the scale.
NOTE
The scale value only serves for orientation. The
scale value does not represent the working depth
in centimetres.
Adjust the working depth hydraulically using the
"beige" tractor control unit.
1
2
CMS-I-00002447
6.3.2.6 Adjusting the working height of the side guide plates
The side guide plates keep the displaced soil within
the implement. The side guide plates must be
adjusted so that the side discs do not form soil ridges
and soil furrows.
The height and length of the side guide plates can
be adjusted on the holding arms and via the hole
patterns.
CMS-I-00003484
CMS-T-00002258-D.1
CMS-T-00002259-D.1
CMS-T-00002260-C.1
CMS-T-00004430-B.1
6 | Preparing the machine
Preparing the implement for operation
MG6158-EN-II | H.1 | 30.04.2021
44
