Amazone CatrosXL 3003, Оригинальное руководство по эксплуатации

Страница: 3 / 82

TABLE OF CONTENTS
1 About this operating manual 1
1.1 Diagrams 1
1.1.1 Warnings and signal words 1
1.1.2 Further instructions 1
1.1.3 Instructions 2
1.1.4 Lists 3
1.1.5 Item numbers in figures 3
1.2 Other applicable documents 4
1.3 Your opinion is important 4
2 Safety and responsibility 5
2.1 Basic safety instructions 5
2.1.1 Meaning of the operating manual 5
2.1.2 Safe operating organisation 5
2.1.3 Knowing and preventing dangers 10
2.1.4 Safe operation and handling of the
machine
12
2.1.5 Safe maintenance and modification 15
2.2 Safety routines 19
3 Intended use 22
4 Product description 23
4.1 Implement overview 23
4.2 Special equipment 24
4.3 Function of the implement 24
4.4 Protective equipment 25
4.4.1 Road safety bars 25
4.5 Warning symbols 25
4.5.1 Positions of the warning symbols 25
4.5.2 Layout of the warning symbols 26
4.5.3 Description of the warning symbols 26
4.6 Lighting and identification for
road travel
29
4.6.1 Lighting and identification to the rear 29
4.6.2 Lighting and identification to the front 29
4.7 Threaded cartridge 30
4.8 Rating plate on the implement 30
5 Technical data 31
5.1 Dimensions 31
5.2 Soil tillage tools 31
5.3 Permitted mount categories 31
5.4 Optimal working speed 31
5.5 Performance characteristics of
the tractor
32
5.6 Noise development data 32
5.7 Drivable slope inclination 32
6 Preparing the machine 34
6.1 Calculating the required tractor
characteristics
34
6.2 Coupling the implement 37
6.2.1 Driving the tractor towards the
implement
37
6.2.2 Coupling the hydraulic hose lines 37
6.2.3 Coupling the power supply 39
6.2.4 Coupling the 3-point mounting frame 39
6.2.5 Aligning the implement horizontally 39
6.3 Preparing the implement for
operation
40
6.3.1 Preparing the side discs for operation 40
6.3.2 Adjusting the working depth 41
6.3.3 Preparing the wheel mark
eradicator for operation
47
6.3.4 Installing ballast weights 49
6.3.5 Adjusting the scraper to the roller 49
6.3.6 Removing the road safety bars 50
6.4 Preparing the machine for road
travel
51
6.4.1 Preparing the side discs for road
travel
51
6.4.2 Putting on the road safety bars 52
TABLE OF CONTENTS
MG6158-EN-II | H.1 | 30.04.2021 I