2.
Use the setting lever
1
to relieve the linch pins
2
and
3
.
3.
Remove the linch pins on the left and right
adjustment unit.
4.
Using the setting lever, adjust the trailing
elements to the desired height.
5.
Secure the trailing elements in the desired
position with the linch pins.
CMS-I-00002240
6.
If the trailing element has an upper adjustment
unit
1
,
adjust the upper adjustment unit in the same way.
CMS-I-00002243
7.
Put the setting lever
1
in the holder.
8.
Secure the setting lever with a linch pin
2
.
CMS-I-00002242
6 | Preparing the machine
Preparing the implement for operation
MG6158-EN-II | H.1 | 30.04.2021
46
