Bismarck
52
237
Using pieces 117, 118 (x2) 119 (x2) and 120 which you
can find on laser sheet 3554, move on to the assembly of an-
other smaller structure which will be later fixed on the struc-
ture assembled in the previous phase.
243
Insert group 121-122 in the "T" joint of piece 123. The
lower side of piece 121 must protrude under base 123 in order
to receive piece 124.
244
Glue piece 124 under the structure and check the correct
assembly from the picture in detail. Insert and glue piece 125 in
the joint of piece 123. Be careful to correctly orient the elements.
239
Close with roof 120 and glue it in the upper joints of cen-
tral pieces 119. The detail above shows the structure seen from
the opposite side. As you can see, the two pieces 118 protrude
from the profile of roof 120 (white lines).
240
With a small file, remove these protrusions and bring the
two side pieces 118 flush with the roof. Temporarily put this
structure aside.
242
Assemble the two pieces 121 and 122 together, placing
122 on the lower side of the longer arm of piece 121.
238
Insert pieces 118 (x2) and 119 (x2) into the joints of base
117 by orienting the inclined side downwards, then glue with
wood glue.
241
Move on to the assembly of another small structure with
the use of the pieces shown in the picture above and which you
can find on sheet 3554.
237
241
238
242
239
243
244
117
118
118
118
118
118
118
119
119
118
117
117
119
117
118
119
120
126
127
121
122
122
121
121
122
125
123
125
122
124
123
123
123
124
121
120
120
120
240
123
124
BOW
BOW
