Bismarck
40
177
Cut out the five cardboard templates from the printed adhesive sheet: A, B, C, D,
E on the starboard side and try to position them dry on the signs traced on the hull.
Remove the double-sided adhesive backing on the back of the cardboard and attach
the mask on the hull in place.
174
176
175
177
174
The picture shows the final result of the colouring of the black band towards
the bow.
175
Now position yourself on the deck and locate the centreline, bring the dimensions shown in the picture and technical drawing 166 to the edge of the bulwarks. Move
perpendicularly on the side of the hull and mark in pencil on the black band the position of the white pieces, A-B-C which correspond to the three cardboard masks that you
will need for colouring, see step 179.
176
Move to the bow and in the same way mark in pencil the dimensions shown in the picture on the edge of the bulwark and then on the side. Always work on both sides
of the model.
13
2
m
m
7
7
mm
226
mm
2
3
mm
98m
m
3
4
mm
1
76
m
m
176 35m
m
252mm
59mm
155mm
E
E
D
C
B
A
