Amano AGP-2000 Series, Руководство по установке и эксплуатации, Страница: 35 / 40

Emptying the Ticket Vault Bin
3. Your AGP-2000 is equipped with a ticket Vault Bin Reset Switch, located on the
vault bin bracket. You may have a push-button type switch located in the corner
of the bracket, or a roller-ball type switch located in the center of the bracket. If
the push-button switch is present, you must press the switch to reset the
internal ticket vault counter to 0. If your AGP-2000 is equipped with the roller-
ball type switch, the counter is reset automatically when the bin is removed.
4. Replace the vault bin.
Preventative Maintenance
In order to keep your AGP-2000 running efficiently, Amano recommends that you
perform the following Preventative Maintenance procedures:
RWPV™ : Use commercially available canned or compressed air to periodically blow
out dust buildup from the read/write/print/vault mechanism. This includes the dual
ticket feed module, ticket transport, rollers, optic sensors, printer mechanism and
ticket throat.
Magnetic Head: Periodically unlatch and open the printer mechanism to clean the
magnetic head with a cotton swab and isopropyl alcohol.
Rubber Rollers: When any of the rubber rollers require cleaning, do not use
alcohol . Alcohol dries out rubber and will cause deterioration of the rollers.
Use a cleaner specifically formulated for rubber, such as MG Chemical's ® "408A
Rubber Renue" or Rawn TM Company’s “Re-Grip” and a cotton swab.
AGP-2000 Installations and Operations / SERVICE 4 - 7
Figure 4-6, The Vault Bin Reset Switch