Amano AGP-2000 Series Скачать руководство пользователя страница 34 | Manualshive

Страница: 34 / 40

Amano AGP-2000 Series Скачать руководство пользователя страница 34

Issuing Lost Tickets

If a customer loses a ticket, a replacement “lost ticket” is needed to validate the
transaction at the exit. The AGP-2000 gives you the ability of issuing replacement lost
tickets in advance. Follow the instructions below to issue lost tickets.

1. Unlock and open the door panel.
2. Press the ticket issue button for each lost ticket needed. The tickets issued will

have the words “LOST TICKET” printed on them.

3. Close and lock the door panel when you are finished.

Emptying the Ticket Vault Bin

The AGP-2000 is equipped with a ticket vault bin to store retracted and vaulted
tickets. Tickets are retracted when a backout situation occurs or when the ticket issue
timer has run out. When the internal Ticket Vault Counter reaches 50 tickets, the
AGP-2000 will no longer issue tickets and the display will change to the following:

To recover from a full ticket vault bin and a “CLOSED” status, perform
the following procedure:

1. Use the keys provided to unlock and open the door panel.
2. Locate the ticket Vault Bin shown in Figure 4-5. Remove the bin and all

vaulted tickets.

CLOSED

V10/17/99

09:39A

4 - 6

AGP-2000 Installation and Operations / SERVICE

Figure 4-5 Removing Vault Bin

«
...
32
33
34
35
36
...
»

Содержание AGP-2000 Series









































Отзывы:

Нет отзывов