Amano AGP-2000 Series Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 40

Amano AGP-2000 Series Скачать руководство пользователя страница 15

Chapter 3 : INSTALLATION

Prepare The Unit

After the AGP-2000 Ticket Dispenser has been received, confirm that all parts are
included. Each AGP-2000 includes an envelope taped to the top cover containing
keys, the

AGP-2000 Programming Instruction Manual

(ATD-107500) and this

AGP-2000 Installation and Operations Manual

. Any accessory kit will be shipped

separately, along with installation information. Notify Amano Cincinnati Inc. if any of
these items are missing. Check the carton for shipping damage. If anything is
damaged, notify the transportation company and file a claim. The transportation
company is responsible for the shipment after it leaves the factory. The AGP-2000
Ticket Dispenser must be installed according to the instructions described in this
manual. Failure to install the unit properly may result in voiding the warranty for repair
or replacement of the unit.

Unpack the Unit

After you remove the shipping carton, unpack the internal components:
1. Unlock and open the side door panel if you have not already done so.
2. Pull the front cover release latch upward.
3. Pull the rear cover release latch towards the front of the unit.
4. Slide the cover up to open it. The cover can be removed if needed.
5. Remove the strap from around the front shaft of the printer mechanism.
6. Remove the vault box and remote control unit taped to the bottom plate of the

unit and set them aside.

7. Remove the tickets from the ticket transport.
8. Close the cover and pull the front cover release latch downward to lock.

Remove The Skid

1. Unlock and open the side door panel if you have not already done so.
2. Locate the four threaded studs securing the AGP-2000 to the skid.
3. Remove the four 3/8” nuts and spacers from the mounting studs and set

them aside.

4. Remove the AGP-2000 from the skid.

AGP-2000 Installation and Operations / INSTALLATION

3 - 1

«
...
13
14
15
16
17
...
»

Содержание AGP-2000 Series









































Отзывы:

Нет отзывов