Amano AGP-2000 Series Скачать руководство пользователя страница 32 | Manualshive

Страница: 32 / 40

Amano AGP-2000 Series Скачать руководство пользователя страница 32

Ticket Restocking

A Low Ticket situation occurs when the primary box of tickets is depleted and the
secondary box of tickets is being used. There is no indication on the display when the
Ticket Dispenser is low on tickets. An Out of Tickets situation occurs when the AGP-
2000 ticket supply is completely depleted. When the ticket dispenser is out of tickets
the display will change to the following:

A Low Ticket alarm and an Out of Ticket alarm is available through the RS-485
communications lines or through the optional secondary I/O Rack (AGP-0502/A527).

To restock the tickets in the AGP-2000:

1. Unlock and open the side door panel.
2. Remove and discard the empty ticket boxes.
3. Remove the top of the new ticket boxes and discard.
4. Place one ticket box in each of the ticket box brackets. Place the boxes in the

unit so that the words “Machine Tickets” are in the upper right corner of the box.
The tickets will be fed into the ticket transport with the preprinted numbers
towards the rear and bottom of the unit and the magnetic strip up and to the
right as the tickets exit the machine.

5. Feed the tickets from the rear box into the rear opening of the ticket transport

until resistance is felt. The machine will then grab the tickets and thread them
into position automatically.

6. If dual ticket feed is being used, repeat the procedure with stock from the

second box, this time using the secondary feed in front of the main feed.

Out of Tickets

10/17/99

09:39A

4 - 4

AGP-2000 Installation and Operations / SERVICE

Figure 4-4 Loading 3-inch Tickets

«
...
30
31
32
33
34
...
»

Содержание AGP-2000 Series









































Отзывы:

Нет отзывов