Amann Girrbach 178740-STM, Руководство пользователя

Страница: 63 / 68

63
M A L F U N C T I O N S , R E P A I R S A N D W A R R A N T Y
E N
▷
Plug in the mains plug and switch the furnace on
again as required.
Replacing the thermoelement
▷
Switch the furnace off and pull the mains plug.
▷
If required, wait until the furnace has cooled to
room temperature.
▷
Dismantle the furnace cover (please refer to
page 43).
▷
Unscrew the screws for the connection cables 1
and pull out the conductors.
▷
Unscrew the thermoelement screw 2 and care-
fully pull out the thermoelement to the top.
Fig. 37
1 Screws for the connection cables
2 Screw for the thermoelement
▷
Mount a new thermoelement in reverse order.
Pay attention to the correct polarity of the con-
nection cables!
▷
Mount the furnace cover (please refer to
page 46).
▷
Plug in the mains plug and switch the furnace on
again as required.
Replacing a fuse
▷
Switch the furnace off and pull the mains plug.
▷
If required, wait until the furnace has cooled to
room temperature.
▷
On the rear side of the furnace, turn the fuse
holder in anticlockwise direction and pull it out
(bayonet lock).
▷
Replace the defective fuse against an identical
one.
▷
Insert fuse holder with new fuse in furnace rear
wall and lock it by twisting in clockwise direc-
tion.
8.3 Warranty
The warranty complies with the statutory provi-
sions. For more information, please refer to our
General Terms of Business.
In addition, it also applies that warranty and liabil-
ity claims are excluded for personal and property
damage, when these can be attributed to one or
more of the following causes:
_
Each person involved with operating, mounting,
maintaining, repairing the system must have
read and understood the User Manual. No liabil-
ity shall be assumed whatsoever for damages
and operating malfunctions resulting from non-
observance of the User Manual.
_
Use of the system not in accordance with the
intended use.
2
1