Amanda Amanda Portal CallQ Agent Скачать руководство пользователя страница 20 | Manualshive

Страница: 20 / 61

background image

20

The fields within this dialog box are:

Minimum lost time When a caller calls into the queue, and they realize they

didn’t want to be queued and they hangup or dial another mailbox

leaving the queue, if the number of seconds they were holding is lower
than the minimum lost time, that call is not counted as a lost call.

Noticed queued time When enabled, after the specified number of minutes,

calls holding in queue for that amount of time will have their background

color changed to the specified color. The default is black. Click the “Color
Black…” button to select a color other than black.

Warning queued time If enabled, after the specified number of minutes, calls

holding in queue for that amount of time will have their background

color changed to the specified color. The default is black. Click the “Color
Black…” button to select a color other than black.

High queued time If enabled, after the specified number of minutes, calls

holding in queue for that amount of time will have their background

color changed to the specified color. The default is black. Click the “Color
Black…” button to select a color other than black.

Urgent queued time If enabled, after the specified number of minutes, calls

holding in queue for that amount of time will have their background

color changed to the specified color. The default is black. Click the “Color
Black…” button to select a color other than black.

Extreme queued time If enabled, after the specified number of minutes, calls

holding in queue for that amount of time will have their background

color changed to the specified color. The default is black. Click the “Color
Black…” button to select a color other than black.

Maximum queued time The maximum number of minutes a caller can hold in

queue for an agent. When enabled, callers who hold for the maximum

queue time will be sent to voicemail to where they can record a message.
The default is 0 minutes (which is no queue timeout). To enable the

maximum queued time you must un-check the no queue timeout check
box.

No queue timeout When checked, there is no queue timeout. Callers can hold

in queue indefinitely. Un-checking no queue timeout will enable the

maximum queued time field where a maximum queue time can be
specified in minutes.

Important Note: Each queued time parameter can be enabled by itself if
selecting a single parameter. However, when enabling more than one queue

time parameter, each queued time setting has a priority level, and must have a
value greater than the queued time above it, and less than the queued time
parameter below it.

Figure 11

shows an example using high, urgent, and

«
...
18
19
20
21
22
...
»

Содержание Amanda Portal CallQ Agent






























































Отзывы:

Нет отзывов

Похожие инструкции для Amanda Portal CallQ Agent

Бренд: Omron Страницы: 4

Бренд: DataCard Страницы: 2

Бренд: TruCluster Страницы: 88

Бренд: TC Works Страницы: 20

Бренд: Universal Audio Страницы: 585

Бренд: Focusrite Страницы: 35

Бренд: Livescribe Страницы: 88

HISCDE-AB-IA - Host Intrusion Prevention

Бренд: McAfee Страницы: 154

Бренд: TANDBERG Страницы: 19

Бренд: Euphonix Страницы: 2

Бренд: Canon Страницы: 139

Бренд: Canon Страницы: 101

StorageWorks 64 - SAN Director Switch

Бренд: HP Страницы: 160

StorageWorks 8/24 - SAN Switch

Бренд: HP Страницы: 110

StorageWorks 4/8 - SAN Switch

Бренд: HP Страницы: 42

StorageWorks 8/8 - SAN Switch

Бренд: HP Страницы: 54

HD2600XT - Radeon 512MB Pcie

Бренд: ATI Technologies Страницы: 4

Advanced Standalone Mode

Бренд: TerraTec Страницы: 3

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды