5.33
First calibration scaling point
Display:
CAL1
Range:
Any display value
Default Value:
n/a
First scaling point for 2 point calibration scaling - See “Calibration” chapter, section
5.34
Second calibration scaling point
Display:
CAL2
Range:
Any display value
Default Value:
n/a
Second scaling point for 2 point calibration scaling - See “Calibration” chapter, section
5.35
Temperature null calibration
Display:
"C NULL
Range:
n/a
Default Value:
n/a
This function allows the temperature sensor output to be referenced to the instruments null value
using short circuit input. See section
for details.
5.36
Temperature calibration
Display:
CAL "C
Range:
n/a
Default Value:
n/a
This function is used to calibrate the temperature sensor. See section
for details.
5.37
Conductivity measuring units
Display:
cond unit
Range:
uS.cm
,
uS.m
,
mS.cm
or
mS.m
Default Value:
uS.cm
Selects the conductivity measuring units to be displayed, seen only if
SEt dISP
set to
cond
.
Choices available are:
•
uS.cm
to display in microSiemens per centimetre (uS/cm)
•
uS.m
to display in microSiemens per metre (uS/m)
•
mS.cm
to display in milliSiemens per centimetre (mS/cm)
PM4COMAN-2.2-1
31 of
