Amada MF-C2000A Series, Руководство по эксплуатации, Страница: 241 / 272

1 . Error Display and How to Take a Measure
241
MF-C2000A Series
Chapter 2 Inspection and Measure T
o Be T
aken at Occurrence of an Error
Introduction Part
Operating Part
Maintenance Part
Appendixes
Installation
and
Preparation
Part
No . Contents of error LD
USER I/O
(output)
Measures
1085 Memory Card Error OFF Trouble
There is a problem with the memory card.
If the error persists after restarting, please contact us.
1098
Out Of Memory: RAM Regis-
tration
- Data error If these massages are displayed, please contact us.
1099
Out Of Memory: Part Regis-
tration
- Data error
Memory capacity has been reached when attempting to
register a part, or the part may be unsupported.
Check part registration.
1100
Out Of Memory: Layout Reg-
istration
OFF Trouble
Memory capacity has been reached when attempting
to register a layout file, or the layout file may be unsup -
ported.
Check layout file registration.
1117 Scanner Connection Error OFF Trouble
A scanner connection error has occurred.
Confirm the connection.
1184 AC Power Down OFF Trouble
AC power has been disconnected.
If you turn off the power without turning off the LD, this
error is added to RAS. Please turn off the power after
turning off the LD.
1190 Data buffer overflow - Data error
The figure size exceeded the limit for data.
Reduce the size of the data.
1200
Schedule Data controller ver-
sion error
- Data error
The controller version of schedule data is incorrect.
Please check the controller version.
1201
Schedule Data peak power
error
- Data error
It is outside the setting range of peak power of schedule
data.
Check the setting value.
1202
Schedule Data frequency er-
ror
- Data error
It is outside the setting range of schedule data frequen-
cy. Check the setting value.
1203 Schedule Data duty error - Data error
It is out of the setting range of the duty ratio of schedule
data.
Check the setting value.
1204
Schedule Data upslope
power error
- Data error
It is out of the setting range of the up slope power of
schedule data.
Check the setting value.
1205
Schedule Data downslope
power error
- Data error
It is out of the setting range of down slope power of
schedule data. Check the setting value.
1206
Schedule Data upslope dis-
tance error
- Data error
It is out of the setting range of the up slope distance of
schedule data.
Check the setting value.
1207
Schedule Data downslope
distance error
- Data error
It is outside the setting range of the down slope distance
of schedule data.
Check the setting value.
1208
Schedule Data upslope time
error
- Data error
It is out of the setting range of the up slope time of
schedule data.
Check the setting value.