Amada MEA-100B, Руководство по эксплуатации, Страница: 32 / 87

MEA-100B
8. Stepper-Up Function
8-1
8. Stepper-Up Function
The stepper-up (-down) function lets you increase or decrease the welding current when
the weld count reaches the set value.
Increasing the welding current automatically according to wear of the electrode can
extend the life of the electrode. (Stepper-up)
Use this function for fusing in which the welding current must be reduced to
accommodate increased temperatures within an electrode or workpieces. (Stepper-down)
(1) Turning on the Stepper-Up Function

Press the [MENU] key and the [

] key simultaneously for at least a second. This
displays the SET2 screen shown below.

Move the cursor to "a" above. Press the [+] key to go to the #2 screen.

Move the cursor to "b" above. Press the [+] key to change the setting to 1.
1 The stepper up function ON
0 The stepper up function OFF

Press the [MENU] key to return to the MENU screen.
♯１ ＮＰ ＣＣ ＳＳ ＳＭ ＳＤＴ
０ ０ ０ １ ０５
ａ
♯２ ＳＵ ＲＷ ＷＳ ＨＥＴ ＣＭＩ
０ ０ ０ ００ ＤＥＦ
ｂ