БЛОК УПРАВЛЕНИЯ CUID-400N
|
БЛОК УПРАВЛІННЯ CUID-400N
|
CONTROL UNIT CUID-400N
41
GENERAL WARNINGS AND SAFETy RULES
1.
GENERAL WARNINGS AND SAFETy RULES
Y
This manual contains important information concerning safety. Prior to commencing
installation study closely all the information provided below. Save this manual for future
reference!
Do not commence product assembly and operation, if you have any questions or something
remains unclear. If necessary address the nearest customer service or ALUTECH office.
Follow the precautions, provided by any active regulatory documents and by those in this manual.
Follow safety regulations during operations.
Installing, connections, final tests, commissioning, maintenance and repair (troubleshooting)
should be performed only by qualified and trained specialists. Installing, connection, configura-
tion and operation of the product in violation of the requirements are prohibited, as this can
result in damage, injuries and cause losses.
Making any changes in any elements of the product structure and unintended use of the product
are prohibited. The manufacturer and the supplier are not liable for any damages, caused by
unauthorised changes to the product or its unintended use.
The possible risk (hazard) degree should be assessed. Please, identify, which additional devices
(accessories) are required to prevent possible risks and to ensure compliance with the safety
provisions in force.
The product is not intended for use in the presence of acid, salt or explosion hazard media.
Keep the product away from sources of heat and open flame or at a safe distance. The violation
of this requirement can result in the damage of the product, cause it to malfunction, catch fire
or create other dangerous situations.
Please, make sure that foreign objects, water and other liquids are not present inside the prod-
uct, otherwise disconnect the product from the mains supply and consult the service centre.
The operation of the product in such a condition is not safe. The control unit is assembled with
cable glands facing downwards to avoid water penetration.
When performing any works (installation, repair, maintenance, cleaning etc.) and to connections
inside the product, disconnect the mains circuit. If the master switch is out of sight, then attach
safety sign stating: ‘
Do not turn on
.
People are working
’ and take measures preventing the
possibility of unauthorised restoring of the power supply.
In the case of power cable (power cord) damage, it should be replaced by a manufacturer’s
specialist or maintenance department specialist.
Please, follow the safety measures when using the power cable (power cord):
•
fully insert the plug into the socket;
•
when taking the plug out of the socket do not pull by the cord;
•
do not use a socket with bad contacts;
•
do not touch a plug with wet hands;
•
do not damage the power cable, do not twist the cable, do not bend and stretch it;
•
do not place heavy objects on the power cable and do not place it near hot objects;
•
ensure easy access to the socket;
•
use only the power cable supplied;
•
it is forbidden to use a defective or damaged power cable.
Use a socket, matching with the plug type 015 3P + N + E 16A / 6h to connect to the power supply.
Please, make sure that the installation places for the drive system components are protected
from impacts and the surface on to which the drive system is installed is solid.
The control unit should be located within sight of the equipment, at a height not less than 1.5 m.
