Step # 2 SET COOK TEMPERATURE
NOTE: Cook Temperature cannot be set in the Steam Program Mode.
To set temperature, push Cook Temp
key and use
or
keys to set a temperature within the range specified for the
program mode selected.
Step # 3 SET TIMER/CORE TEMPERATURE
TIMER
Push Timer
key and use
or
keys for selection of
required cook time. If continuous time setting is desired, press
Timer key until "----" is displayed.
CORE TEMPERATURE
As an alternative to timer operation, use this option
in any program mode to cook by sensing
internal product temperature.
• Insert probe in product.
• Press Core Temp
key and
or
keys to
set the required internal product temperature.
Step #4 SET HUMIDITY LEVEL
Humidity setting can only be used in Superheated Steam and
Retherm programs.
Turn the Humidity Control
dial to a setting between
1 and 6.
Step #5 PROGRAM START/STOP
Press
key to Start or Stop program.
The display will always indicate the remaining cook time.
To check oven temperatures, press Cook Temp
key for 3
seconds; the display will indicate actual temperature. At the end
of the program, a buzzer will sound for a period of 70 seconds.
The buzzer can be immediately deactivated by pressing any
program key.
Step #6 SHUT-DOWN
After daily use, set the Burner Control
knob (with SIT-
valve ONLY) and Power Selector switch to the "OFF" position.
Selector switch to the "OFF" position.
UNLOCKING AND LOCKING COOKING PROGRAMS
Use this feature to lock one or all of the five cooking programs to a
preselected cook temperature and core temperature or cook time.
UNLOCKING A LOCK STATUS
➽
Switch POWER (18) knob "ON" and the main DISPLAY (10) will
be steadily lit [ . . ], if locked. The buzzer may or may not be
active. If the buzzer is active do not try to cancel.
➽
Simultaneously press the COOK TEMP (11) and the TIMER (12)
keys . The DISPLAY (10) will indicate the locked status "Loc".
➽
To Unlock using the UP key (14) or DOWN key (15) select "unL"
and press the START/STOP key (16), until the main DISPLAY
(10) begins to flash [ . . ].
LOCKING PROGRAMS
➽
Select each of the five program keys (5-9) .
➽
Set a desired cook temperature and/or core temperature or
cook time using the keys (11-15) for each program and press
START/STOP key (16) for each completed program.
➽
Switch POWER knob (18) OFF. AFter a few moments, switch
POWER knob (18) back ON.
➽
Simultaneously press the COOK TEMP key (11) and the
TIMER (12) keys . DISPLAY (10) will indicate "unL".
➽
Using the UP key (14) or DOWN key (15) select "Loc" and press
the START/STOP key (16) until the main DISPLAY (10)
becomes steadily lit [ . . ].
All the program parameters such as temperature, time or core
temperature chosen for the various programs are now locked and
cannot be changed until they are unlocked again.
OPERATING A LOCKED SYSTEM
Once one or more of the cooking programs are preset and locked,
the user should be instructed to follow the operating procedure
outlined below.
➽
Start the Combitherm system according to the procedure
discussed in the Basic Operation Section 2.8.
➽
Select a locked cooking program by pressing the program
selection key (5-9) and if desired, insert the Core Temperature
Control Probe into the product.
➽
Press START/STOP key (16) to execute the locked program.
Changing programs while the locked system is in operation is
only possible by pressing the START/STOP key (16) to leave one
pro-gram and again to start the next. If a locked program is
selected and if program choices keys such as COOK TEMP (11)
or TIMER (12) or CORE TEMP (13) are pressed, set parameters will
be displayed.
After the locked cooking time runs out or when cooking process
is completed, the buzzer will sound and will switch the fan and
burner off.
START
STOP
1
2
3
4
5
6
Operation and Care Manual #6011 • 14
2.9 - ADVANCED COMBITHERM OPERATION
O p e r a t i o n • S e c t i o n 2
