Safety information
Instruction manual 91/104 V9.2
•
Clean the drive with a vacuum cleaner. Do not use organic solvents. There is a danger of damaging the drive.
•
It is essential for your safety that any revision of the drive is carried out by our company.
•
In case of disposal, the drive must be considered an industrial waste, therefore comply with the rules imposed by the laws in
force in the country in which it is installed.
1.3 Warnings
•
Maintenance shall be carried out by qualified technical personnel.
•
The ground connection and installation of the drive must be carried out in accordance with the security rules imposed by the
laws in force in the country where the drive is installed.
•
Appropriate preparation must be given to operators and machine operators.
•
The drive can cause radio frequency interference if it lacks the appropriate network filter.
•
Follow the specifications of the drive and follow the instructions in this manual.
•
Ensure that adequate ventilation and cleaning of the drive is maintained.
•
Avoid penetration of water or other fluids inside the drive.
•
For wiring use appropriate cables, possibly shielded.
1.4 Directives, trademarks and standards
The drive PWM3D-000 complies with the following industrial standards:
Standard/Marking
Description
CEI EN 60204-1
Low voltage safety directive, 73/23/EEC.
CEI EN 61800-3
Product standard related to EMC Directive 89/336/EEC.
CEI EN 60529
Degree of protection IP20.
CE
CE marking.
4
Alter Elettronica s.r.l.